Resource Center

Browse our library of customer stories, product videos, webinars, and eGuides.

Optical design and manufacturability webinars

Whether you are just starting out or looking to fine tune your skills and get new ideas, we offer free optical design software webinars to make sure you get the most out of your Zemax software. Webinars touch on topics including Zemax OpticStudio and other optics design solutions. Browse through our free, on-demand webinars below.

Optical design and manufacturability webinars
Watch Now
Featured Webinar

Automotive Industry Insights: A Conversation with EPIC Director of Technology & Innovation and Zemax CTO

Recently leaders in the field of automotive lighting sat down with European Photonics Industry Consortium Director of Technology Jose Pozo and Zemax CTO Sanjay Gangadhara to discuss exciting innovations in the industry. 

Design Considerations for Smart Lighting Systems

Design Considerations for Smart Lighting Systems

December 08, 2022
6:00 am PDT & 11:00 am PDT

Register Now!

Recorded optical design and manufacturability webinars

Equation Driven Surfaces for Optical Parts Creation in OpticsBuilder
Webinar

Equation Driven Surfaces for Optical Parts Creation in OpticsBuilder

Watch now
Optotune Liquid Lenses Added to Zemax Stock Components
Webinar

Optotune Liquid Lenses Added to Zemax Stock Components

Watch now
HUD Workflow Example – Ansys Zemax OpticStudio & Ansys Speos
Webinar

HUD Workflow Example – Ansys Zemax OpticStudio & Ansys Speos

Watch now
Modeling a Lidar System in OpticStudio: Characterizing Range for Lidar Systems
Webinar

Modeling a Lidar System in OpticStudio: Characterizing Range for Lidar Systems

Watch now
Industry Insights: Innovations in the Automotive Industry
Webinar

Industry Insights: Innovations in the Automotive Industry

Watch now
Modeling a Flash Lidar System Using Optical-Optomechanical Zemax Workflow
Webinar

Modeling a Flash Lidar System Using Optical-Optomechanical Zemax Workflow

Watch now
Mechanics of an Ansys Zemax Workflow: OpticStudio – OpticsBuilder – Speos
Webinar

Mechanics of an Ansys Zemax Workflow: OpticStudio – OpticsBuilder – Speos

Watch now
Designing Cell phone Camera Lenses with an Interoperability Workflow – Part 2
Webinar

Designing Cell phone Camera Lenses with an Interoperability Workflow – Part 2

Watch now
Designing Cell phone Camera Lenses with an Interoperability Workflow – Part 1
Webinar

Designing Cell phone Camera Lenses with an Interoperability Workflow – Part 1

Watch now
Modeling Flash Lidar in OpticStudio, Part 2: Lidar Simulation in Non-Sequential Mode
Webinar

Modeling Flash Lidar in OpticStudio, Part 2: Lidar Simulation in Non-Sequential Mode

Watch now
Cell Phone Lens: The Fundamentals Behind the Optical System Design
Webinar

Cell Phone Lens: The Fundamentals Behind the Optical System Design

Watch now
Modeling Flash Lidar in OpticStudio, Part 1: Lidar Component Setup in Sequential Mode
Webinar

Modeling Flash Lidar in OpticStudio, Part 1: Lidar Component Setup in Sequential Mode

Watch now