- Home
- User Articles
- Modeling Laser Cavities using ZEMAX and LASCAD
- Home
- Illumination & Stray Light
- Modeling Laser Cavities using ZEMAX and LASCAD
Modeling Laser Cavities using ZEMAX and LASCAD
- By Christoph Rüttimann
- Published 21 June 2006
- User Articles , Illumination & Stray Light
-
Rating:
Analysis and Comparison With Experiment
Here are the results of a comparison between the ZEMAX-LASCAD simulation and the experimentally measured results:
It can be seen that the comparison between the simulated and experimentally obtained results are very good.
| Parameter | ZEMAX-LASCAD Simulation | Measurement | Difference |
| M2x | 1.85 | 1.8 | 3% |
| M2y | 3.95 | 3.8 | 4% |
| Power | 20.5W | 18.7 W | 9% |
It can be seen that the comparison between the simulated and experimentally obtained results are very good.
